OCEAN

TYCK OCEAN H220 مقياس مستوى السائل الهيدروستاتيكي من النوع القضيبي

النسخة القياسية | جهاز إرسال مستوى السائل المُدخل بالقضيب المستقيم، مستشعر مستوى الماء، هيدروستاتيكي، ستانلس ستيل، مضاد للانفجار، مضاد للتآكل، مضاد للانسداد، مقاوم لدرجات الحرارة العالية

مقياس مستوى السائل

TYCK OCEAN H220 مقياس مستوى السائل الهيدروستاتيكي من النوع القضيبي

النسخة القياسية | جهاز إرسال مستوى السائل المُدخل بالقضيب المستقيم، مستشعر مستوى الماء، هيدروستاتيكي، ستانلس ستيل، مضاد للانفجار، مضاد للتآكل، مضاد للانسداد، مقاوم لدرجات الحرارة العالية

SKU

اختيار الطراز

1 configurations

يحدّث اختيار SKU صورة المنتج والمواصفات.

Selected Model

النموذج القياسيH220-158-01
التركيب / الإصدار
النموذج القياسي
الطراز السابق
APT350
طراز المنصة
H220

Product Overview

وصف المنتج

يعتمد مقياس مستوى السائل الهيدروستاتيكي من النوع القضيبي على العلاقة بين الضغط الهيدروستاتيكي للسائل وارتفاع مستوى السائل. عندما يكون السائل في حالة سكون، يتوزع ضغطه الداخلي بالتساوي. يتناسب ضغط السائل مع ارتفاع مستوى السائل، لذلك يمكن تحديد ارتفاع مستوى السائل عن طريق قياس الضغط الهيدروستاتيكي الناتج عن السائل.

Technical Data

المعلمات الفنية

نموذج المنصة
H220 (انتقال قياسي مزدوج)
الموديل القديم
APT350
مبدأ القياس
نوع الضغط الثابت
التثبيت
نوع القطب

هوية التهيئة

رمز الطراز ودليل التهيئة

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
H220
Catalogue product ID
158

رموز الطلب المنشورة

  • H220-158-01

حقول التهيئة المنشورة

  • التركيب / الإصدار
  • الطراز السابق
  • طراز المنصة

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

التحقق الميداني

فحوصات التركيب والتوصيل والتشغيل

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

قبل التركيب

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

قبل التوصيل

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

قبل التشغيل

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

فروق SKU المنشورة

فروق SKU ضمن السلسلة نفسها

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

A comparable same-family SKU matrix is not published on this page. Request the exact order code and matching technical documents for the intended configuration.

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
H220

Request configuration-specific documents

SKU Matrix

الطرز المتاحة

1 configurations

SKU CodeModelالمواصفاتUnit
H220-158-01النموذج القياسي
التركيب / الإصدار
النموذج القياسي
الطراز السابق
APT350
طراز المنصة
H220
قطعة

FAQ

الأسئلة الشائعة

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.