PRIME

TYCK PRIME APT800 Transmisor de presión de diafragma de brida única

La selección depende del medio, rango, conexión a proceso, materiales en contacto, alimentación, salida y condiciones de instalación; el rendimiento y las certificaciones deben verificarse según el SKU elegido y la documentación técnica confirmada.

Transmisor de presión

TYCK PRIME APT800 Transmisor de presión de diafragma de brida única

La selección depende del medio, rango, conexión a proceso, materiales en contacto, alimentación, salida y condiciones de instalación; el rendimiento y las certificaciones deben verificarse según el SKU elegido y la documentación técnica confirmada.

SKU

Selección de modelo

2 configurations

La selección de SKU actualiza la imagen y las especificaciones.

Selected Model

Carcasa blanca y azulSKU-51-003

Product Overview

Descripción del producto

El transmisor de presión diferencial de silicio monocristalino es un instrumento de medición industrial, utilizado para medir la diferencia de presión en líquidos y gases. Su tecnología central es el chip de silicio monocristalino, la medición se realiza mediante el procesamiento de la oblea de silicio monocristalino en un sensor de presión micro.

Technical Data

Parámetros técnicos

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

IDENTIDAD DE CONFIGURACIÓN

Código de modelo y guía de configuración

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
APT800
Catalogue product ID
51

Códigos de pedido publicados

  • SKU-51-003
  • SKU-51-006

Campos de configuración publicados

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

VERIFICACIÓN EN CAMPO

Comprobaciones de instalación, cableado y puesta en marcha

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

Antes de instalar

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

Antes de cablear

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

Antes de la puesta en marcha

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

DIFERENCIAS DE SKU PUBLICADAS

Diferencias entre SKU de la misma serie

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

SKU CodeModelDiferencias publicadasUnit
SKU-51-003Carcasa blanca y azul

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-51-006Carcasa azul pura

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
APT800

Request configuration-specific documents

SKU Matrix

Modelos disponibles

2 configurations

SKU CodeModelEspecificacionesUnit
SKU-51-003Carcasa blanca y azulConfirm for selected configurationunidad
SKU-51-006Carcasa azul puraConfirm for selected configurationunidad

FAQ

Preguntas frecuentes

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.