PRIME

TYCK PRIME 3051 LT bride simple

La sélection dépend du fluide, de la plage, du raccord process, des matériaux en contact, de l’alimentation, de la sortie et des conditions de montage ; les performances et certifications doivent être vérifiées selon le SKU choisi et les documents techniques confirmés.

Transmetteur de pression

TYCK PRIME 3051 LT bride simple

La sélection dépend du fluide, de la plage, du raccord process, des matériaux en contact, de l’alimentation, de la sortie et des conditions de montage ; les performances et certifications doivent être vérifiées selon le SKU choisi et les documents techniques confirmés.

Consult This Product

Product Overview

Description du produit

Capteur de pression en silicium monocristallin totalement scellé et isolé, technologie de dosage précis du liquide de remplissage, élimine l'influence de la température et de la pression statique, structure de surcharge à double membrane, résiste facilement aux épreuves de surcharge élevée ; les transmetteurs de pression et de pression différentielle en silicium monocristallin utilisent tous des puces de silicium monocristallin de haute précision, garantissant l'exactitude et la stabilité des résultats de mesure

Technical Data

Paramètres techniques

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

IDENTITÉ DE CONFIGURATION

Code modèle et guide de configuration

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
3051
Catalogue product ID
59

Codes de commande publiés

No normalized order code is published on this page. Request the exact configured code before ordering.

Champs de configuration publiés

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

VÉRIFICATION SUR SITE

Contrôles d’installation, de câblage et de mise en service

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

Avant l’installation

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

Avant le câblage

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

Avant la mise en service

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

DIFFÉRENCES SKU PUBLIÉES

Différences entre SKU de la même série

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

A comparable same-family SKU matrix is not published on this page. Request the exact order code and matching technical documents for the intended configuration.

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
3051

Request configuration-specific documents

FAQ

Questions fréquentes

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.