TYCK PRIME 小型圧力伝送器
媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。
21 SKUs →
圧力伝送器
2 configurations
TYCK PRIME APT800 単フランジ隔膜式圧力伝送器
媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。
SKU
モデル選択
SKUを選択すると製品画像と仕様が更新されます。
No matching model
Selected Model
青白筐体
SKU-51-003Product Overview
製品説明
単結晶シリコン差圧伝送器は工業用測定機器で、液体・気体中の圧力差を測定するために用いられます。コア技術は単結晶シリコンチップであり、単結晶シリコンウエハを加工して微型圧力センサを形成することで測定を実現しています。
Technical Data
技術パラメータ
Parameters vary by model. Select a SKU or contact our engineers for confirmation.
構成識別
モデルコードと構成確認ガイド
The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.
- Base model
APT800- Catalogue product ID
- 51
公開済み注文コード
SKU-51-003SKU-51-006
公開済み構成項目
No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.
Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.
現場確認
設置・配線・試運転チェック
This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.
設置前
- Match the product identity, nameplate, selected SKU and order documents before work begins.
- Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.
配線前
- Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
- For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.
試運転前
- Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
- Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.
公開済み SKU 差異
同一シリーズの SKU 差異
This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.
| SKU Code | Model | 公開済み差異項目 | Unit |
|---|---|---|---|
SKU-51-003 | 青白筐体 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 個 |
SKU-51-006 | ピュアブルーケース | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 個 |
DOCUMENT CONTROL
Model Code and Technical Documents
Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.
- Base model
- APT800
SKU Matrix
選択可能なモデル
2 configurations
| SKU Code | Model | 仕様 | Unit |
|---|---|---|---|
SKU-51-003 | 青白筐体 | Confirm for selected configuration | 個 |
SKU-51-006 | ピュアブルーケース | Confirm for selected configuration | 個 |
FAQ
よくある質問
These answers support initial selection. Confirm final performance against the selected SKU and technical documents.
What operating data is required before selection?
Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.
How do SKUs of the same product differ?
SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.
Related Products
関連製品
TYCK PRIME APT800 直結型圧力伝送器
媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。
4 SKUs →
TYCK PRIME APT800 単フランジLT形圧力伝送器
媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。
4 SKUs →
TYCK PRIME APT800 遠伝単フランジ形圧力伝送器
媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。
11 SKUs →