OCEAN

TYCK OCEAN H220 Штанговый гидростатический уровнемер

Стандартная модель, прямоштанговый погружной уровнемер-преобразователь, датчик уровня воды, гидростатический, из нержавеющей стали, взрывозащищенный, коррозионностойкий, антизасорный, термостойкий

Датчик уровня жидкости

TYCK OCEAN H220 Штанговый гидростатический уровнемер

Стандартная модель, прямоштанговый погружной уровнемер-преобразователь, датчик уровня воды, гидростатический, из нержавеющей стали, взрывозащищенный, коррозионностойкий, антизасорный, термостойкий

SKU

Выбор модели

1 configurations

Выбор SKU обновляет изображение и характеристики.

Selected Model

Стандартная модельH220-158-01
Конструкция / версия
Стандартная модель
Модель платформы
H220
Предыдущая модель
APT350

Product Overview

Описание продукции

Штанговый гидростатический уровнемер работает на основе зависимости между гидростатическим давлением жидкости и высотой уровня жидкости. Когда жидкость находится в состоянии покоя, ее внутреннее давление распределено равномерно. Давление жидкости пропорционально высоте уровня, поэтому путем измерения гидростатического давления, создаваемого жидкостью, можно определить высоту уровня жидкости.

Technical Data

Технические параметры

Модель платформы
H220 (двойной стандартный переход)
Старая модель
APT350
Принцип измерения
тип статического давления
Установка
столбчатого типа

ИДЕНТИФИКАЦИЯ КОНФИГУРАЦИИ

Код модели и руководство по конфигурации

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
H220
Catalogue product ID
158

Опубликованные коды заказа

  • H220-158-01

Опубликованные поля конфигурации

  • Конструкция / версия
  • Модель платформы
  • Предыдущая модель

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

ПРОВЕРКА НА ОБЪЕКТЕ

Проверка монтажа, подключения и ввода в эксплуатацию

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

Перед монтажом

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

Перед подключением

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

Перед вводом в эксплуатацию

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

ОПУБЛИКОВАННЫЕ РАЗЛИЧИЯ SKU

Различия SKU одной серии

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

A comparable same-family SKU matrix is not published on this page. Request the exact order code and matching technical documents for the intended configuration.

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
H220

Request configuration-specific documents

SKU Matrix

Доступные модели

1 configurations

SKU CodeModelХарактеристикиUnit
H220-158-01Стандартная модель
Конструкция / версия
Стандартная модель
Модель платформы
H220
Предыдущая модель
APT350
шт.

FAQ

Частые вопросы

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.