PRIME

TYCK PRIME 3051 LT Brida simple

La selección depende del medio, rango, conexión a proceso, materiales en contacto, alimentación, salida y condiciones de instalación; el rendimiento y las certificaciones deben verificarse según el SKU elegido y la documentación técnica confirmada.

Transmisor de presión

TYCK PRIME 3051 LT Brida simple

La selección depende del medio, rango, conexión a proceso, materiales en contacto, alimentación, salida y condiciones de instalación; el rendimiento y las certificaciones deben verificarse según el SKU elegido y la documentación técnica confirmada.

Consult This Product

Product Overview

Descripción del producto

Sensor de presión de monocrystal de silicio totalmente sellado y totalmente aislado, con tecnología de carga de líquido precisa, que elimina la influencia de la temperatura y la presión estática; estructura de sobrecarga de doble diafragma, que resiste fácilmente la prueba de alta sobrecarga; tanto los transmisores de presión diferencial como los de presión de monocrystal de silicio adoptan chips de monocrystal de silicio de alta precisión, lo que garantiza la precisión y estabilidad de los resultados de medición

Technical Data

Parámetros técnicos

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

IDENTIDAD DE CONFIGURACIÓN

Código de modelo y guía de configuración

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
3051
Catalogue product ID
59

Códigos de pedido publicados

No normalized order code is published on this page. Request the exact configured code before ordering.

Campos de configuración publicados

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

VERIFICACIÓN EN CAMPO

Comprobaciones de instalación, cableado y puesta en marcha

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

Antes de instalar

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

Antes de cablear

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

Antes de la puesta en marcha

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

DIFERENCIAS DE SKU PUBLICADAS

Diferencias entre SKU de la misma serie

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

A comparable same-family SKU matrix is not published on this page. Request the exact order code and matching technical documents for the intended configuration.

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
3051

Request configuration-specific documents

FAQ

Preguntas frecuentes

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.