PRIME

TYCK PRIME APT200 Transmisor de presión de alta temperatura

La selección depende del medio, rango, conexión a proceso, materiales en contacto, alimentación, salida y condiciones de instalación; el rendimiento y las certificaciones deben verificarse según el SKU elegido y la documentación técnica confirmada.

Transmisor de presión

TYCK PRIME APT200 Transmisor de presión de alta temperatura

La selección depende del medio, rango, conexión a proceso, materiales en contacto, alimentación, salida y condiciones de instalación; el rendimiento y las certificaciones deben verificarse según el SKU elegido y la documentación técnica confirmada.

SKU

Selección de modelo

9 configurations

La selección de SKU actualiza la imagen y las especificaciones.

Selected Model

Sin pantalla M20*1.5SKU-99-001

Product Overview

Descripción del producto

Se basa principalmente en el elemento sensible elástico interno. Cuando el elemento se ve sometido a la acción de la presión externa, sufre una deformación elástica, lo que provoca un cambio correspondiente en el valor de la resistencia conectada a él. Este cambio en el valor de resistencia se convierte en una salida de señal eléctrica a través de un circuito correspondiente, logrando así la medición y el control de la presión.

Technical Data

Parámetros técnicos

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

IDENTIDAD DE CONFIGURACIÓN

Código de modelo y guía de configuración

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
APT200
Catalogue product ID
99

Códigos de pedido publicados

  • SKU-99-001
  • SKU-99-002
  • SKU-99-003
  • SKU-99-004
  • SKU-99-005
  • SKU-99-006
  • SKU-99-007
  • SKU-99-008
  • SKU-99-009

Campos de configuración publicados

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

VERIFICACIÓN EN CAMPO

Comprobaciones de instalación, cableado y puesta en marcha

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

Antes de instalar

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

Antes de cablear

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

Antes de la puesta en marcha

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

DIFERENCIAS DE SKU PUBLICADAS

Diferencias entre SKU de la misma serie

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

SKU CodeModelDiferencias publicadasUnit
SKU-99-001Sin pantalla M20*1.5

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

pieza
SKU-99-002Sin pantalla G1/2

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-99-003Sin pantalla G1/4

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-99-004Visualización de LCD M20*1.5

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-99-005Pantalla de cristal líquido G1/2

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-99-006Pantalla de cristal líquido G1/4

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-99-007Pantalla digital M20*1.5

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

pieza
SKU-99-008Pantalla digital G1/2

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad
SKU-99-009Visualización digital G1/4

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

unidad

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
APT200

Request configuration-specific documents

SKU Matrix

Modelos disponibles

9 configurations

SKU CodeModelEspecificacionesUnit
SKU-99-001Sin pantalla M20*1.5Confirm for selected configurationpieza
SKU-99-002Sin pantalla G1/2Confirm for selected configurationunidad
SKU-99-003Sin pantalla G1/4Confirm for selected configurationunidad
SKU-99-004Visualización de LCD M20*1.5Confirm for selected configurationunidad
SKU-99-005Pantalla de cristal líquido G1/2Confirm for selected configurationunidad
SKU-99-006Pantalla de cristal líquido G1/4Confirm for selected configurationunidad
SKU-99-007Pantalla digital M20*1.5Confirm for selected configurationpieza
SKU-99-008Pantalla digital G1/2Confirm for selected configurationunidad
SKU-99-009Visualización digital G1/4Confirm for selected configurationunidad

FAQ

Preguntas frecuentes

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.