TYCK PRIME 3051 LT 単フランジ

Name: TYCK PRIME 3051 LT 単フランジ
Brand: TYCK

圧力伝送器

TYCK PRIME 3051 LT 単フランジ

媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。

Consult This Product

Product Overview

製品説明

完全密封・完全隔離型の単結晶シリコン圧力センサで、正確な充填液量制御技術により温度と静圧の影響を除去し、二重ダイヤフラム過負荷構造により高い過負荷試験に余裕を持って対応できます。単結晶シリコン差圧・圧力トランスミッタはいずれも高精度単結晶シリコンチップを採用し、測定結果の正確性と安定性を確保しています

Technical Data

技術パラメータ

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

構成識別

モデルコードと構成確認ガイド

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model: 3051
Catalogue product ID: 59

公開済み注文コード

No normalized order code is published on this page. Request the exact configured code before ordering.

公開済み構成項目

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

現場確認

設置・配線・試運転チェック

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

設置前

Match the product identity, nameplate, selected SKU and order documents before work begins.
Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

配線前

Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

試運転前

Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

公開済み SKU 差異

同一シリーズの SKU 差異

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

A comparable same-family SKU matrix is not published on this page. Request the exact order code and matching technical documents for the intended configuration.

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.