PRIME

TYCK PRIME 3001 斜面圧力伝送器

媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。

圧力伝送器

TYCK PRIME 3001 斜面圧力伝送器

媒体、測定レンジ、プロセス接続、接液材質、電源、出力、設置条件に基づいて選定し、性能および認証は選択したSKUと確認済み技術文書で照合してください。

SKU

モデル選択

3 configurations

SKUを選択すると製品画像と仕様が更新されます。

Selected Model

M20*1.5SKU-75-001

Product Overview

製品説明

TY-3001シリーズ圧力スイッチです。本製品は4-20mAアナログ信号出力、2系統のリレー接点出力を搭載し、現場表示機能を備えています。SMTプロセスと集積回路の設計理念を採用し、センサに定電圧励起・定電流励起を供給可能で、拡散シリコン式、セラミック式、ひずみゲージ式の各圧力センサに対応できます。内蔵マイクロプロセッサにより、3キーによるプログラミングでゼロ点・フルスケール・小数点・制御点・電流の設定を実現し、ポテンショメータによる調整は一切不要です。本体全体が産業級温度環境に対応し、強力な耐干渉性を備えています。

Technical Data

技術パラメータ

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

構成識別

モデルコードと構成確認ガイド

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
3001
Catalogue product ID
75

公開済み注文コード

  • SKU-75-001
  • SKU-75-002
  • SKU-75-003

公開済み構成項目

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

現場確認

設置・配線・試運転チェック

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

設置前

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

配線前

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

試運転前

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

公開済み SKU 差異

同一シリーズの SKU 差異

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

SKU CodeModel公開済み差異項目Unit
SKU-75-001M20*1.5

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

個
SKU-75-002G1/2

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

個
SKU-75-003G1/4

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

個

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
3001

Request configuration-specific documents

SKU Matrix

選択可能なモデル

3 configurations

SKU CodeModel仕様Unit
SKU-75-001M20*1.5Confirm for selected configuration個
SKU-75-002G1/2Confirm for selected configuration個
SKU-75-003G1/4Confirm for selected configuration個

FAQ

よくある質問

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.