PRIME

TYCK PRIME APT800 단일플랜지 LT 압력 트랜스미터

매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.

압력 트랜스미터

TYCK PRIME APT800 단일플랜지 LT 압력 트랜스미터

매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.

SKU

모델 선택

4 configurations

SKU를 선택하면 제품 이미지와 사양이 업데이트됩니다.

Selected Model

블루화이트 하우징SKU-52-001

Product Overview

제품 설명

전체 밀폐·전체 분리형 단결정 실리콘 압력 센서로 정확한 충액량 기술을 적용하여 온도·정압의 영향을 제거하며 이중 다이어프램 과부하 구조로 높은 과부하 시험에도 안정적으로 대응합니다; 단결정 실리콘 차압·압력 트랜스미터는 모두 고정밀 단결정 실리콘 칩을 채택하여 측정 결과의 정확성과 안정성을 보장합니다

Technical Data

기술 파라미터

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

구성 식별

모델 코드 및 구성 확인 안내

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model
APT800
Catalogue product ID
52

공개된 주문 코드

  • SKU-52-001
  • SKU-52-002
  • SKU-52-003
  • SKU-52-004

공개된 구성 필드

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

현장 확인

설치·배선·시운전 점검

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

설치 전

  1. Match the product identity, nameplate, selected SKU and order documents before work begins.
  2. Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

배선 전

  1. Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
  2. For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

시운전 전

  1. Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
  2. Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

공개된 SKU 차이

동일 시리즈 SKU 차이

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

SKU CodeModel공개된 차이 항목Unit
SKU-52-001블루화이트 하우징

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

개
SKU-52-002순블루 케이스

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

개
SKU-52-003레드 화이트 하우징

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

개
SKU-52-004스테인리스 스틸 하우징

No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.

개

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model
APT800

Request configuration-specific documents

SKU Matrix

선택 가능한 모델

4 configurations

SKU CodeModel사양Unit
SKU-52-001블루화이트 하우징Confirm for selected configuration개
SKU-52-002순블루 케이스Confirm for selected configuration개
SKU-52-003레드 화이트 하우징Confirm for selected configuration개
SKU-52-004스테인리스 스틸 하우징Confirm for selected configuration개

FAQ

자주 묻는 질문

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What operating data is required before selection?

Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.

How do SKUs of the same product differ?

SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.