TYCK PRIME 컴팩트형 압력 트랜스미터
매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.
21 SKUs →
Product Overview
제품 설명
고품질 소재와 제조 공정을 채택하여 매우 높은 신뢰성을 가지며 구조가 간단하고 설치가 편리하여 측정 대상 매체에 직접 설치할 수 있으며 별도의 지지나 고정이 필요하지 않습니다;
Technical Data
기술 파라미터
Parameters vary by model. Select a SKU or contact our engineers for confirmation.
구성 식별
모델 코드 및 구성 확인 안내
The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.
- Base model
APT800- Catalogue product ID
- 53
공개된 주문 코드
SKU-53-001SKU-53-002SKU-53-003SKU-53-004SKU-53-005SKU-53-006SKU-53-007SKU-53-008SKU-53-009SKU-53-010SKU-53-011
공개된 구성 필드
No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.
Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.
현장 확인
설치·배선·시운전 점검
This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.
설치 전
- Match the product identity, nameplate, selected SKU and order documents before work begins.
- Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.
배선 전
- Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
- For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.
시운전 전
- Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
- Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.
공개된 SKU 차이
동일 시리즈 SKU 차이
This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.
| SKU Code | Model | 공개된 차이 항목 | Unit |
|---|---|---|---|
SKU-53-001 | DN20-DN40 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-002 | DN50 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-003 | DN65 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-004 | DN80 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-005 | DN100 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-006 | 순블루 DN20-40 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-007 | 퍼블루 DN50 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-008 | 순청색 DN65 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-009 | 퓨어블루 DN80 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-010 | DN100 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
SKU-53-011 | 스테인리스 스틸 | No normalized difference fields are published for this SKU; confirm the configuration in the RFQ. | 개 |
DOCUMENT CONTROL
Model Code and Technical Documents
Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.
- Base model
- APT800
SKU Matrix
선택 가능한 모델
11 configurations
| SKU Code | Model | 사양 | Unit |
|---|---|---|---|
SKU-53-001 | DN20-DN40 | Confirm for selected configuration | 개 |
SKU-53-002 | DN50 | Confirm for selected configuration | 개 |
SKU-53-003 | DN65 | Confirm for selected configuration | 개 |
SKU-53-004 | DN80 | Confirm for selected configuration | 개 |
SKU-53-005 | DN100 | Confirm for selected configuration | 개 |
SKU-53-006 | 순블루 DN20-40 | Confirm for selected configuration | 개 |
SKU-53-007 | 퍼블루 DN50 | Confirm for selected configuration | 개 |
SKU-53-008 | 순청색 DN65 | Confirm for selected configuration | 개 |
SKU-53-009 | 퓨어블루 DN80 | Confirm for selected configuration | 개 |
SKU-53-010 | DN100 | Confirm for selected configuration | 개 |
SKU-53-011 | 스테인리스 스틸 | Confirm for selected configuration | 개 |
FAQ
자주 묻는 질문
These answers support initial selection. Confirm final performance against the selected SKU and technical documents.
What operating data is required before selection?
Provide the measured variable, medium, range, operating pressure and temperature, connection, materials, power, output and compliance requirements.
How do SKUs of the same product differ?
SKUs may differ by structure, range, connection, material, display or output. Final performance and supply scope depend on the selected SKU.
Related Products
관련 제품
TYCK PRIME APT800 직결형 압력 트랜스미터
매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.
4 SKUs →
TYCK PRIME APT800 단일 플랜지 다이어프램 압력 트랜스미터
매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.
2 SKUs →
TYCK PRIME APT800 단일플랜지 LT 압력 트랜스미터
매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.
4 SKUs →