TYCK PRIME 3051 LT 단일 플랜지

Name: TYCK PRIME 3051 LT 단일 플랜지
Brand: TYCK

압력 트랜스미터

TYCK PRIME 3051 LT 단일 플랜지

매체, 측정 범위, 프로세스 연결, 접액 재질, 전원, 출력 및 설치 조건에 따라 선정하고, 성능과 인증은 선택한 SKU 및 확인된 기술 문서로 검증해야 합니다.

Consult This Product

Product Overview

제품 설명

완전 밀폐, 완전 절연 단결정 실리콘 압력 센서이며 정확한 충액량 기술을 적용하여 온도와 정압의 영향을 제거하고 이중 다이어프램 과부하 구조로 높은 과부하 시험에도 안정적으로 대응합니다; 단결정 실리콘 차압 및 압력 트랜스미터는 모두 고정밀 단결정 실리콘 칩을 채택하여 측정 결과의 정확성과 안정성을 보장합니다

Technical Data

기술 파라미터

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

구성 식별

모델 코드 및 구성 확인 안내

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model: 3051
Catalogue product ID: 59

공개된 주문 코드

No normalized order code is published on this page. Request the exact configured code before ordering.

공개된 구성 필드

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

현장 확인

설치·배선·시운전 점검

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

설치 전

Match the product identity, nameplate, selected SKU and order documents before work begins.
Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

배선 전

Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

시운전 전

Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

공개된 SKU 차이

동일 시리즈 SKU 차이

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

A comparable same-family SKU matrix is not published on this page. Request the exact order code and matching technical documents for the intended configuration.

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.