APT800 In-Line Pressure Transmitter

Pressure Transmitter

TYCK PRIME APT800 In-Line Pressure Transmitter

In-Line Pressure Transmitter with configuration-specific range, connection, material and output options

SKU

Model Selection

4 configurations

Selecting a SKU updates the product image and specifications.

Selected Model

Blue-white Housing Direct-connected PressureSKU-49-002

Consult Selected SKU

Product Overview

Product Description

TYCK PRIME APT800 In-Line Pressure Transmitter is a configurable in-Line Pressure Transmitter for gauge or absolute pressure measurement. Measuring range, process connection, wetted materials, output, environmental limits and approvals depend on the selected configuration and must be confirmed in the TYCK quotation and order documents.

Engineering focus: For the APT800 in-line version, identify gauge or absolute reference and verify the direct process connection, diaphragm system, configured span and installation orientation.

This page separates the product identity from order-specific performance claims. Use the published SKU matrix as a starting point, then provide the operating data listed below. Values that are absent from the current technical record are treated as pending confirmation rather than inferred from another manufacturer.

TYCK and the model designation identify this product only. References used for information architecture or terminology do not imply manufacture by, affiliation with, or performance equivalence to any third-party brand.

Technical Data

Technical Parameters

Parameters vary by model. Select a SKU or contact our engineers for confirmation.

EVIDENCE-SAFE SUMMARY

Verified Highlights

Only catalogue identity and published configuration status are asserted here; order-specific values require matching technical documents.

Product identity: TYCK PRIME APT800 In-Line Pressure Transmitter.
Engineering focus: For the APT800 in-line version, identify gauge or absolute reference and verify the direct process connection, diaphragm system, configured span and installation orientation.
Published configurations on this page: 4.
Range, materials, output and approvals are confirmed against the selected SKU before order acceptance.
Unlisted values are marked for confirmation and are not copied from competitor literature.

APPLICATION REVIEW

Applications and Operating Limits

Typical applications

Direct gauge or absolute pressure measurement in process piping, skids and utility equipment.
Pump, compressor or hydraulic monitoring after pulsation and overpressure are reviewed.
Control-system integration after pressure reference, range, output and connection are confirmed.

Limitations / confirm before use

Oxygen, hydrogen, sanitary, strongly corrosive or hazardous-area service requires explicit material, cleanliness and certification review.
Remote seals, capillaries, vacuum, pulsation and high process temperature can affect response and accuracy and require application engineering.

RFQ INPUTS

Information Required for Selection

Send these operating details with the product ID and selected SKU so the quotation can be checked against the application.

Measured medium
Operating and design range
Process and ambient temperature
Process pressure
Process connection
Wetted materials
Output and power supply
Area classification or required certificate
Quantity and required documents
Gauge, absolute or differential reference
Overpressure, static pressure, pulsation or remote-seal requirement

CONFIGURATION IDENTITY

Model Code and Configuration Guide

The base model identifies the published product family. An order code identifies a listed SKU only; it does not prove unlisted options, approvals or performance. Confirm the selected code against the quotation and controlled technical documents.

Base model: APT800
Catalogue product ID: 49

Published order codes

SKU-49-002
SKU-49-004
SKU-49-007
SKU-49-008

Published configuration fields

No normalized SKU option fields are published on this page. Treat the product identity as a family reference and confirm every order-specific value.

Only the values printed beside a published SKU are represented here. Blank or unlisted combinations must be confirmed rather than inferred.

FIELD VERIFICATION

Installation, Wiring and Commissioning Checks

This is a pre-commissioning verification checklist, not a substitute for the configuration-specific manual, drawing, certificate or site procedure. Stop and obtain the matching controlled document if any item is unclear or inconsistent.

Before installation

Match the product identity, nameplate, selected SKU and order documents before work begins.
Check the confirmed medium, range, process temperature and pressure, connection, wetted materials, mounting location and environmental conditions.

Before wiring

Use only the terminal assignment, supply limits, output type, grounding and cable requirements in the document issued for the supplied configuration.
For a hazardous-area installation, verify the exact Ex marking, certificate scope, barriers and local installation requirements before energizing.

Before commissioning

Commission in a safe process state and verify the configured range, units, zero/reference condition and expected loop or digital output.
Record the product identity, serial or order reference, configuration, checks performed and the controlled-document revision used.

PUBLISHED SKU DIFFERENCES

Same-family SKU Differences

This comparison uses only the normalized SKU fields already published on this page. It is a shortlist aid, not an authorization to combine options or a replacement for the final order review.

SKU Code	Model	Published difference points	Unit
`SKU-49-002`	Blue-white Housing Direct-connected Pressure	No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.	Piece
`SKU-49-004`	Stainless Steel Housing	No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.	Piece
`SKU-49-007`	PureBlue Direct Connection Pressure	No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.	Piece
`SKU-49-008`	Red and White Housing Direct-connect Pressure	No normalized difference fields are published for this SKU; confirm the configuration in the RFQ.	Piece

DOCUMENT CONTROL

Model Code and Technical Documents

Model codes, datasheets, manuals, certificates and dimensional or wiring files must match the final configuration and revision. This page does not infer missing documents from similar products.

Base model: APT800

Request configuration-specific documents View company certifications

Check certification documents against the exact listed model and configuration: Ex · SIL · CE / EMC ·

SKU Matrix

Available Models

4 configurations

SKU Code	Model	Specifications	Unit
`SKU-49-002`	Blue-white Housing Direct-connected Pressure	Confirm for selected configuration	Piece
`SKU-49-004`	Stainless Steel Housing	Confirm for selected configuration	Piece
`SKU-49-007`	PureBlue Direct Connection Pressure	Confirm for selected configuration	Piece
`SKU-49-008`	Red and White Housing Direct-connect Pressure	Confirm for selected configuration	Piece

FAQ

Frequently Asked Questions

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

How do I select the correct TYCK PRIME APT800 In-Line Pressure Transmitter configuration?

Provide the medium, operating and design conditions, measuring range, process connection, wetted materials, output, power supply, installation constraints, required approvals and quantity. TYCK can then match these inputs to a published SKU or flag a custom requirement. A model-family name alone is not sufficient to confirm performance or compatibility.

Are all specifications shown for TYCK PRIME APT800 In-Line Pressure Transmitter valid for every SKU?

No. The page describes the product family and lists currently published SKU data. Range, accuracy, temperature limits, materials, enclosure and certificates can vary by option. The quotation, order code and referenced datasheet for the selected configuration are the controlling documents. Any missing value should be confirmed before design approval or purchase.

What application details are especially important for this pressure product?

Describe normal, minimum and maximum operating conditions as well as startup, cleaning and upset states. Include the medium properties, mechanical installation, electrical interface and any hazardous-area or hygiene requirement. This lets the technical review identify unsuitable conditions and prevents assumptions based on a visually similar third-party product.